RSH® GS03 WiFi smart carbon monoxide and gas leak detector. App control, App and local tracking
This product is a Smart (WiFi) flammable gas and carbon monoxide alarm, which is used to detect, measure and warn of flammable gas leaks and carbon monoxide, thus preventing damage caused by gas leaks and carbon monoxide poisoning. The alarm uses a high-stability semiconductor gas sensor, which is characterized by high stability and low sensitivity. If a flammable gas leak or carbon monoxide is detected and the concentration value set by the alarm is reached, the product sends an alarm to the application and sounds a siren at a volume of 70.
This product can be used indoors, where carbon monoxide or leakage may occur, for example in kitchens and near boilers and stoves.
How to install
Before installation, check whether the density of the gas to be sensed is heavier or lighter than air.
If the gas is heavier than air:
LPG. etc., install it at a height of 0.3-1 m from the ground, less than 1.5 m from the gas source.
If the gas is lighter than air:
Install natural gas, factory gas, marsh gas, etc. at a height of 0.3-1 m from the ceiling, less than 1.5 m from the gas source.
Test the alarm yourself
There is a self-test button on this product and application to determine if the alarm and buzzer are working properly. When the self-test is pressed, the red LED of the alarm flashes, buzzing and beeping sounds.
Alarm handling
If the concentration value of natural gas or liquefied petroleum gas with heavy ambient air reaches or exceeds the alarm concentration value, the alarm will automatically give a continuous alarm state. At this moment you need to do the following:
1. Close the pipeline valve immediately.
2. Extinguish all sources of ignition and do not use anything that creates sparks.
3. Avoid turning on various electrical devices.
4. Open the windows immediately to exhaust the interior air.
Compatible with BlitzWolf / Tuya Smart / Smart Life apps
Use 2.4GHz WIFI to connect to BW/Tuya/Smart Life APP and track the measured data even remotely (searched on the Internet).
What you will find in the package:
1 × gas leak and carbon monoxide meter and alarm
1 × User Manual
Note:
Please do not put the product in oily and strong convection air or high concentration organic gas for a long time, otherwise it will damage the sensor.
Install the RSH® Smart 230 Volt gas leak and carbon monoxide alarm in a few simple steps:
- Download one of the apps: Tuya / Samart Life / BlitzWolf for Android or IOS and register!
- Add the device (LED flashes green):
- You can already use it:
